How to solve the problem of superalloys machining?

Superalloys refers to a kind of metal material based on iron, nickel and cobalt, which can work for a long time under high temperature above 600℃ and certain stress. With high temperature strength, good oxidation and corrosion resistance, good fatigue performance, fracture toughness and other comprehensive properties. Superalloys is an important material widely used in aviation, aerospace, petroleum, chemical industry and ship.

Learn More

Influence of grinding wheel blockage on cutting force and grinding wheel vibration

Cutting Force: The cutting force of a grinding wheel is caused by two functions: chip formation and friction;  It is generated by physical contact between the grinding wheel structural parts and the workpiece. Under the specified conditions, in the total cutting force, the cutting force related to friction is much larger than that related to chip formation. Because the two cutting forces are associated with each other during chip formation, they are not easily distinguished. Less friction can provide a freer cutting force and reduce surface heat and blockage of the grinding wheel. The cutting force determines the lifespan, abrasion resistance, energy and other grinding standards.

Learn More

PCD Tool Grinding Technology

Learn More

Grinding Wheels For Woodworking Tools

Depending on the tooth pitch, differently shaped grinding wheels are needed to grind the tooth face. The greater the number of teeth around the circumference, the narrower the space between them and the thinner the grinding wheel has to be. Even the narrowest tooth gaps can be machined with our grinding wheels. For reasons of stability, conventional tooth gaps are mainly ground using 4A2, 12V2 or 12V9 grinding wheels.

Learn More

Case of Vit internal grinding wheel for Oil pump nozzle

The main function of the nozzle is to completely atomize the fuel and distribute it evenly throughout the fuel chamber and mixing it fully with the compressed air in the cylinder for good combustion. As an expert in grinding system, MORE shares the following case of Vitrified bond internal grinding wheel for Oil pump nozzle.

Learn More

Diamond wheel for PCB Micro-drill

Air conditioners, televisions, microwave ovens, induction cookers, cars, airplanes, electric cars, printers, fax machines, telephones and even toys with electricity are all common things in life using a component- -PCB.

Learn More

How to reduce the influence of vibration during grinding

In production grinding operations, ripples on the surface of parts are potential clues to vibration problems in the machine or operating procedures. You will feel the influence of the ripples during inspection, or when there are still grinding or polishing steps in the later stage, you need to spend more time on removing the ripples.

Learn More

Characteristics of abrasive belt grinding

High speed abrasive belt is used as grinding tool, the method of grinding various surfaces is called abrasive belt grinding.

Learn More

Gear grinding

Wheel Size:  D450mm * H127mm

Wheel Type:  01, face bevel 2 sides 30 degrees

Learn More

The difference between transverse turning and longitudinal turning

－ Not all profiles can be transversely turned with a limited number of tools, and more tools may need to be replaced during machining

Learn More